Martin Eberhard
2023-09-08 21:02:20 UTC
MAKEDISK and SAVEDISK:
I've written a couple of PDP8 programs to transfer RX01 and RX02 full-disk images (such as the .RX01 and .RX02 files in David Gesswein's collection) to and from floppy, via a serial port. These programs do more or less what dumprest does, with the following differences:
1) They do not require a special program on the PC side, because the file transfer uses the Xmodem protocol. Teraterm, for example, works perfectly.
2) They are a lot more verbose, both for normal use, and for debugging disk and com errors.
3) They are pretty quick, because they transfer serial port data a track at a time, so that they can interleave disk accesses for max speed.
4) MAKEDISK verifies what it writes by reading each track back after it is written.
5) For single-density disks, only one memory field is required, and the standard RIM and BIN loaders are preserved in that field. (Double density disks require a 2nd field, still preserving the loaders.)
6) Both programs can run in any memory field.
As an example, with the serial port set at 38.4K baud, writing and verifying a complete single-density disk takes less than three minutes.
I've tested these programs with the following configurations:
1) RX02 drive, single-density disk
2) RX02 drive, double-density disk
3) RX02 drive emulating an RX01 (internal switch setting)
All of the above using a single serial port - both for dialog with the user and for Xmodem data transfer)
All of the above, with two serial ports - one for user dialog, the other for transferring Xmodem data
Both programs are heavily (excessively) commented. Complete instructions for their use and customization are at the beginning of each program.
I assemble PDP8 code using PALBART, so I expect these to assemble correctly with PAL-8 too.
You can find MAKEDISK here:
https://deramp.com/downloads/mfe_archive/005-Documentation%20and%20Code%20by%20Martin/010%20Code%20by%20Martin/DEC%20PDP8%20Code/MAKEDISK%20RX01%20RX02%20Disk%20Restore/
You can find SAVEDISK here:
https://deramp.com/downloads/mfe_archive/005-Documentation%20and%20Code%20by%20Martin/010%20Code%20by%20Martin/DEC%20PDP8%20Code/SAVEDISK%20RX01%20RX02%20Disk%20Archiver/
Enjoy.
Martin E.
I've written a couple of PDP8 programs to transfer RX01 and RX02 full-disk images (such as the .RX01 and .RX02 files in David Gesswein's collection) to and from floppy, via a serial port. These programs do more or less what dumprest does, with the following differences:
1) They do not require a special program on the PC side, because the file transfer uses the Xmodem protocol. Teraterm, for example, works perfectly.
2) They are a lot more verbose, both for normal use, and for debugging disk and com errors.
3) They are pretty quick, because they transfer serial port data a track at a time, so that they can interleave disk accesses for max speed.
4) MAKEDISK verifies what it writes by reading each track back after it is written.
5) For single-density disks, only one memory field is required, and the standard RIM and BIN loaders are preserved in that field. (Double density disks require a 2nd field, still preserving the loaders.)
6) Both programs can run in any memory field.
As an example, with the serial port set at 38.4K baud, writing and verifying a complete single-density disk takes less than three minutes.
I've tested these programs with the following configurations:
1) RX02 drive, single-density disk
2) RX02 drive, double-density disk
3) RX02 drive emulating an RX01 (internal switch setting)
All of the above using a single serial port - both for dialog with the user and for Xmodem data transfer)
All of the above, with two serial ports - one for user dialog, the other for transferring Xmodem data
Both programs are heavily (excessively) commented. Complete instructions for their use and customization are at the beginning of each program.
I assemble PDP8 code using PALBART, so I expect these to assemble correctly with PAL-8 too.
You can find MAKEDISK here:
https://deramp.com/downloads/mfe_archive/005-Documentation%20and%20Code%20by%20Martin/010%20Code%20by%20Martin/DEC%20PDP8%20Code/MAKEDISK%20RX01%20RX02%20Disk%20Restore/
You can find SAVEDISK here:
https://deramp.com/downloads/mfe_archive/005-Documentation%20and%20Code%20by%20Martin/010%20Code%20by%20Martin/DEC%20PDP8%20Code/SAVEDISK%20RX01%20RX02%20Disk%20Archiver/
Enjoy.
Martin E.